CERAMAX® RAPID
CERAMAX® Rapid is a fast setting tile adhesive mortar with high stability and adhesion strength, containing mineral fillers, special cement and modified chemicals.
Complies with EN 12004-1 standard as C1FT class.
C1: Normal performance cement based adhesive
F: Fast setting adhesive
T: Reduced slip property
Areas of Application
● Areas that need to be put into service in a short time
● Interior and exterior areas, horizontal and vertical surfaces
● Ceramic, granite, marble, natural stone and decorative brick applications
● Areas exposed to heavy pedestrian and load traffic
Advantages
● Thanks to its quick setting properties, it can be put into service in a short time
● High adhesion performance
● Does not slip on vertical surfaces thanks to its thixotropic structure
● Easy to prepare and apply
● High stability and strength
|
General Information |
|
|
Material composition |
Mineral fillers, special cement, special chemical additives |
|
Appearance |
Grey powder |
|
Density |
~1.79 kg/L |
|
Performance Data (EN 12004-2) |
|
|
Early adhesion strength (after 6 hours) |
≥ 0.5 N/mm² |
|
Initial adhesion strength |
≥ 0.5 N/mm² |
|
After water immersion |
≥ 0.5 N/mm² |
|
After heat aging |
≥ 0.5 N/mm² |
|
After freeze-thaw |
≥ 0.5 N/mm² |
|
Open time (10 min) |
≥ 0.5 N/mm² |
|
Slip |
≤ 0.5 mm |
|
Application Data |
|
|
Application temperature |
+5°C / +35°C |
|
Service temperature |
−20°C / +80°C |
|
Mixing ratio |
6.5 – 7 L water / 25 kg |
|
Pot life |
~45 minutes |
|
Open time |
≥ 10 min |
|
Adjustment time |
~3–5 min |
|
Grouting time |
6 hours |
|
Light traffic |
6 hours |
|
Consumption |
~5–6 kg/m² |
|
Safety Data |
|
|
Reaction to fire (EN 13501-1) |
A1 |
|
Hazardous substances |
Refer to SDS |
The figures stated above are valid at an ambient temperature of +23°C and 50% relative humidity. Higher temperatures shorten the time, while lower temperatures extend it.