THERMOMAX® FPM
THERMOMAX® FPM is a PVC decorative groove profile with alkali-resistant glass-fibre mesh. It is used in external thermal insulation composite systems (ETICS) in decorative grooves cut into the insulation boards.
Fields of Application
• For horizontal and vertical decorative groove lines in external thermal insulation composite systems (ETICS)
• At floor levels, window levels and façade divisions
• On EPS and XPS boards
Advantages
• Creates a straight, sharp groove line of uniform width
• The factory-attached mesh keeps the render reinforcement continuous along the groove
• Prevents cracking at the groove edges
• PVC does not rust and leaves no rust stains on the façade
• Easy to cut and install; no need to true the groove edges by hand
|
General Information |
|
|
Profile material |
PVC |
|
Groove cross-section (width × depth) |
30 × 20 mm 50 × 20 mm |
|
Mesh |
Alkali-resistant glass-fibre mesh |
|
Profile length |
2.5 m |
|
Performance Data |
|
|
Service temperature |
−40°C / +80°C |
|
Corrosion resistance |
PVC; does not rust |
|
Application Data |
|
|
Installation sequence |
After anchoring and cutting the groove, before the main reinforcing mesh |
|
Overlap with main mesh |
Profile mesh fully covered |
|
Consumption |
Equal to groove length (m/m) |
The technical values stated were obtained at an ambient temperature of +23°C and 50% relative humidity.