CERAMAX® STANDARD WHITE
CERAMAX® Standard White is a white color mosaic and ceramic adhesive mortar with standard performance, reduced slip property and extended open time, containing mineral fillers, cement and specially modified chemicals.
Complies with EN 12004-1 standard as C1TE class.
C1: Normal performance cement based adhesive
T: Reduced slip property
E: Extended open time
Areas of Application
● Interior areas, horizontal and vertical surfaces
● Mosaic, small and medium sized ceramic applications
● Areas such as bathrooms, kitchens and corridors
● On cement based plaster, screed and concrete surfaces
For exterior applications and demanding conditions, it is recommended to use with CERAMAX® Addmix to increase performance.
Advantages
● High adhesion performance
● Does not slip on vertical surfaces thanks to its thixotropic structure
● Provides ease of application with extended open time
● Easy to prepare and apply
● Homogeneous and stable mortar structure
|
General Information |
|
|
Material composition |
Mineral fillers, cement, special chemical additives |
|
Appearance |
White powder |
|
Density |
~1.74 kg/L |
|
Performance Data (EN 12004-2) |
|
|
Initial adhesion strength |
≥ 0.5 N/mm² |
|
After water immersion |
≥ 0.5 N/mm² |
|
After heat aging |
≥ 0.5 N/mm² |
|
After freeze-thaw |
≥ 0.5 N/mm² |
|
Open time (30 min) |
≥ 0.5 N/mm² |
|
Slip |
≤ 0.5 mm |
|
Application Data |
|
|
Application temperature |
+5°C / +35°C |
|
Service temperature |
−20°C / +80°C |
|
Mixing ratio |
6.5 – 7 L water / 25 kg |
|
Pot life |
~2 hours |
|
Open time |
≥ 30 min |
|
Adjustment time |
~10–15 min |
|
Grouting time |
24 hours |
|
Ready for service |
Walls: 24 h / Floors: 48 h |
|
Consumption |
~5–6 kg/m² |
|
Safety Data |
|
|
Reaction to fire (EN 13501-1) |
A1 |
|
Hazardous substances |
Refer to SDS |
The figures stated above are valid at an ambient temperature of +23°C and 50% relative humidity. Higher temperatures shorten the time, while lower temperatures extend it.